TGS Aqua Tech, Inc.


Site Map
Translate to Nine Other Languages
Equipment Lines
Carbon
Water Treatment
Waste Water Treatment
Package Design
Preforms
Bottles
Caps & Closures
Daily Essentials
Contact Us
Consulting OnLine
FAQ
Today's Specials
Online Catalog
Wholesale Catalog
  
Water Treatment and Parts, Water and Juice Bottling and New and Used Equipment
Get More For Less at TGS

Hand Held Manual Capper

Manual Hand Held Cappers 20001

Our manual cappers are portable, hand-held, cap tighteners capable of tightening or removing screw and lug type caps. All of our models have adjustable clutches to eliminate cap damage and reduce insert wear. Once the cap is tight the chuck automatically stops spinning, signaling you to move on to the next bottle. All cappers include an overhead slide rail with self-balancer that allows the capper to be suspended neatly and weightlessly overhead, out of the way during case changes, thus reducing labor fatigue.

Specifications:

  Included with both Models:
  • 1 - Aluminum Slide Rail
  • 2 - Black Stands
  • 1 - Balancer
  • 1 - Air Hose
  • 1 - Black Slide Ring
  • 1 - Chuck (up to Size 50)
  • 1 - Insert
  Specs for Model 5-25:
  • Dimensions 2"W x 11"L x 1.5"H
  • Stand Dimensions 52"W x 61"H
  • Requires 80-90 PSI to Operate
  • 1/4" Male Quick Disconnect
  • Adjustable Clutch
  • 1-35 Foot Pounds of Pressure
  • Size 5-25 Chucks
  • 1 Year Manufacturer Warranty
  • Net Weight (approx.) 15 lbs.
  • Shipping Weight (approx.) 23 lbs.
  Specs for Model 5-90:
  • Dimensions 2"W x 12"L x 2"H
  • Stand Dimensions 52"W x 61"H
  • Requires 90-100 PSI to Operate
  • 1/4" Male Quick Disconnect
  • Adjustable Clutch
  • 1-35 Foot Pounds of Pressure
  • Size 5-90 Chucks
  • 1 Year Manufacturer Warranty
  • Net Weight (approx.) 22 lbs.
  • Shipping Weight (approx.) 30 lbs.


Semi Automatic Capper

Semi Automatic Capper 20001

Our Semi-Automatic Chuck Capper (pictured above with optional conveyor), is designed to handle most bottle types including P.E.T., P.V.C., plastic, and glass. To eliminate damage to caps and reduce insert wear the Semi-Automatic Capper comes with an adjustable clutch.
The operator places the caps on the bottles as they pass and the Semi-Automatic Capper automatically tightens them.
Our Semi-Automatic Capper uses the same chucks and inserts as other cappers to accurately tighten caps. A clutch determines how much torque is applied to each cap.

Note: A conveyer and an operator are required. The operator is required to place caps on the bottles as they pass by on the conveyor. Once the caps are in place, the Semi-Automatic Capper can then secure them onto the bottles. Conveyors must be ordered separately.

Specifications:

  Features Include:
  • Automatic Bottling Indexing Unit
  • 40 Bottles Per Minute
  • Adjustable Torque
  • 110v 1 Phase Power
  • User Friendly Control Box
  Specs:
  • 40 BPM
  • Bottle Diameter Minimum: 20mm(3/4") to 180mm(7")
  • Bottle Height Minimum: 50mm(2") to 370mm(15")
  • Electrical System: 110v 1 Phase


Heat Tunnel

Heat Tunnel 20001 Heat Tunnel 20001 Heat Tunnel 20001

Our Heat Tunnel implements a tapered heating process that shrinks your plastic safety seal bottle wrap evenly and gives your bottle a professional look. The 2.5 kilowatt Heat Tunnel is made of all stainless steel construction and large easy to use controls. It also features graduated heat settings and convenient 220v single phase power.

TGS can mount your heat tunnel to your conveyor or make it free standing. The heat range of the Heat Tunnel is 125 to 290 degrees Fahrenheit.

Specifications:

  Features Include:
  • Stainless Steel Construction
  • 220v Power
  • Easy To Use Control Knobs
  • Tapered Heat Design
  • Conveyor Mount or Stand Setup 
  • Stainless Steel Stand
  • Adjustable Feet
  • Individual Heat Controls
  Options Include:
  • Casters
  Specs Heat Tunnel:
  • Dimensions (Overall: 7 1/4"W x 42"L x 52"H (18.42cm x 61cm x 38cm)
  • Height with Stand: 56" (142cm)
  • Net Weight Heating Unit(approx.): 26lbs
  • Net Weight Stand (approx.): 19lbs.
  • Total Shipping Weight(approx.):50lbs.
  • Electrical (Standard): 220v
  • Amps: 7.5
  • Blower: 1/4 HP

BACK TO EQUIPMENT LINES INDEX

MANUAL CAPPER | SEMI AUTOMATIC CAPPER | HEAT TUNNEL


T.G.S. Aqua Tech, Inc.
Located in Jupiter, Florida, U.S.A
Call us at: (561) 743-4330, Fax: (561) 743-5633

Contact UsEmail: tgsaquat@aol.com

Please include your name, title
company name and address,
telephone and fax number.



Copyright © 2001, 2002 TGS Aqua Tech, Inc. All rights reserved.

Home | Equipment Lines | Carbon | Package Design | Water Treatment | Preforms | Bottles
Caps & Closures | Daily Essentials | Contact Us | FAQ | Today's Specials
Online Catalog | Wholesale Catalog